Hybrid system-a promising way solving future energy problems

With the increasing demand for electricity,an efficiency improvement and thereby reduced CO2 emissions of the power plants are expected in order to reach the goals set in the Kyoto protocol.In comparison to conventional systems,the hybrid-systems with the use of synergetic effects offer the possibility to provide a substantial contribution to spare our natural resources and protect our environment.Combined Cycle Power Plants belongs innately hybrid system in the centralized energy market.They can provide large amounts of power and have a quick start-up time.The MGT/FC hybrid system is quite promising in the decentralized energy market.It is widely used in stand-alone applications.Furthermore,the combination of fossil and renewable power plant technologies contains a large synergy potential to increase the efficiency of processes for power plants.New materials,innovative cooling technology,new combustion concepts and optimized production methods are needed to make the potential of these new technologies accessible for a quantum leap in the efficiency.For this it needs considerable research work and good coordinated research projects between the state,industry,research laboratories and universities.      

Rapid and Asymmetric Response of the Earth's Bow Shock:Multipoint Observations

We analyze observations of three bow shock crossings which occurred during 2007, using upstream data from STEREO A/B, ACE and WIND, combined with multi-point THEMIS and Cluster data, and TC-1 data located near noon. During the crossing of 7 May 2007, we find that following a rapid reduction in solar wind ram pressure and subsequent pressure pulse seen by ACE and WIND upstream, the bow shock responds asymmetrically from dawn to dusk. Cluster data on the dawn-side suggest the bow shock is significantly flared and responds rapidly to the pulse arrival, while TC-1 at noon, and THEMIS on the dusk-side, are well matched to the model bow shock, but show a delayed response. The crossings observed on 21 May and 2 June show contrasting response matching the model boundary for northward Interplanetary Magnetic Field (IMF). The IMF and solar wind plasma data suggest that the bow shock crossing at dawn-dusk side and subsolar point were mainly caused by large and smaller scale features of the solar wind ram pressure rise rather than the influence of IMF.      

Large-eddy simulation:Past,present and the future

Large-eddy simulation(LES) was originally proposed for simulating atmospheric flows in the 1960 s and has become one of the most promising and successful methodology for simulating turbulent flows with the improvement of computing power. It is now feasible to simulate complex engineering flows using LES. However, apart from the computing power, significant challenges still remain for LES to reach a level of maturity that brings this approach to the mainstream of engineering and industrial computations. This paper will describe briefly LES formalism first, present a quick glance at its history, review its current state focusing mainly on its applications in transitional flows and gas turbine combustor flows, discuss some major modelling and numerical challenges/issues that we are facing now and in the near future, and finish with the concluding remarks.     

Hybrid Multipopulation Cellular Genetic Algorithm and Its Performance

The selection pressure of genetic algorithm reveals the degree of balance between the global exploration and local optimization.A novel algorithm called the hybrid multi-population cellular genetic algorithm（HCGA）is proposed,which combines population segmentation with particle swarm optimization（PSO）.The control parameters are the number of individuals in the population and the number of subpopulations.By varying these control parameters,changes in selection pressure can be investigated.Population division is found to reduce the selection pressure.In particular,low selection pressure emerges in small and highly divided populations.Besides,slight or mild selection pressure reduces the convergence speed,and thus a new mutation operator accelerates the system.HPCGA is tested in the optimization of four typical functions and the results are compared with those of the conventional cellular genetic algorithm.HPCGA is found to significantly improve global convergence rate,convergence speed and stability.Population diversity is also investigated by HPCGA.Appropriate numbers of subpopulations not only achieve a better tradeoff between global exploration and local exploitation,but also greatly improve the optimization performance of HPCGA.It is concluded that HPCGA can elucidate the scientific basis for selecting the efficient numbers of subpopulations.     

Role of Thermal Stresses in Degradation of High Power Laser Diodes

Catastrophic degradation of high power laser diodes is due to the generation of extended defects inside the active parts of the laser structure during the laser operation. The mechanism driving the degradation is strongly re- lated to the existence of localized thermal stresses generated during the laser operation. These thermal stresses can overcome the yield strength of the materials forming the active part of the laser diode. Different factors contribute to reduce the laser power threshold for degradation. Among them the thermal transport across the laser structure constitutes a critical issue for the reliability of the device.     

Research on windmill starting characteristics of MTE-D micro turbine engine

Micro turbine engine (MTE) is an important kind of propulsion system for miniature unmanned aircraft or missiles, because of its better high-speed performance (than propeller propulsion) and higher propulsion efficiency (obviously than rockets). Windmill start is a common air-starting mode used in micro turbine engine. The windmill starting characteristics are important to the practical use of micro turbine engine. In this paper, the windmill starting characteristics research for a 12 cm diameter (MTE-D) micro turbine engine is carried out by experiment and numerical simulation. The characteristic of rotor mechanical losses at low-speed condition is stud- ied, and the engine common working line of windmill starting process is obtained. Based on the engine windmill characteristics, the propane ignition characteristics under different inflow conditions are researched, and the envelope of propane ignition and propane flameout is determined. The experimental research of fuel supply and ignition characteristics is completed, and the envelope of fuel supply and ignition is obtained. The windmill stage, propane ignition stage, fuel ignition stage and acceleration process from idling-speed to 80% full speed of MTE-D micro turbine engine is optimized, and the optimization windmill starting parameters are collected. The successful wind-mill starting experiment under this condition with engine speed up to 80% full speed indicates that these starting parameters are reasonable. All the starting parameters of MTE-D micro turbine engine obtained in this work are dimensionless parameters, and the conclusions obtained in this study have some reference to other micro turbine engines with the similar structural form and starting process.     

Numerical investigation on jet interaction with a compression ramp

A numerical investigation on jet interaction in supersonic laminar flow with a compres- sion ramp is performed utilizing the AUSMDV scheme and a parallel solver. Several parameters dominating the interference flowfield are studied after defining the relative increment of normal force and the jet amplification factor as the evaluation criterion of jet control performance. The computational results show that most features of the interaction flowfield between the transverse jet and the ramp are similar to those between a jet and a flat plate, except that the flow structures are more complicated and the low-pressure region behind the jet is less extensive. The relative force increment and the jet amplification factor both increase with the distance between the jet and the ramp shortening till quintuple jet diameters. Inconspicuous difference is observed between the jet-before-ramp and jet-on-ramp cases. The variation of the injection angle changes the extent of the separation region, the plateau pressure, and the peak pressure near the jet. In the present computational conditions, 120 is indicated relatively optimal among all the injection angles studied. For cold gas simulations, although little influence of the jet temperature on the pressure distribution near the jet is observed under the computation model and the flow parameters studied, reducing jet temperature somehow benefits the improvement of the normal force and the jet efficiency. When the pressure ratio of jet to freestream is fixed, the relative force increment varies little when increasing the freestream Mach number, while the jet amplification factor increases.     

Characterization of component interactions in two-stage axial turbine

This study concerns the characterization of both the steady and unsteady flows and the analysis of stator/rotor interactions of a two-stage axial turbine. The predicted aerodynamic performances show noticeable differences when simulating the turbine stages simultaneously or separately. By considering the multi-blade per row and the scaling technique, the Computational fluid dynamics(CFD) produced better results concerning the effect of pitchwise positions between vanes and blades. The recorded pressure fluctuations exhibit a high unsteadiness characterized by a space–time periodicity described by a double Fourier decomposition. The Fast Fourier Transform FFT analysis of the static pressure fluctuations recorded at different interfaces reveals the existence of principal harmonics and their multiples, and each lobed structure of pressure wave corresponds to the number of vane/blade count. The potential effect is seen to propagate both upstream and downstream of each blade row and becomes accentuated at low mass flow rates. Between vanes and blades, the potential effect is seen to dominate the quasi totality of blade span, while downstream the blades this effect seems to dominate from hub to mid span. Near the shroud the prevailing effect is rather linked to the blade tip flow structure.     

An investigation of tip vortices unsteady interaction for Fokker 29 propeller with swirl recovery vane

A numerical study was performed to explore the unsteady interaction between the upstream propeller and the downstream swirl recovery vane (SRV) by transient simulations. Much larger fluctuations of thrust coefficient were observed on the vane, which indicates that the varia-tions of the total efficiency depend mainly on the working performance of the stator. The harmonic loads of the decomposed unsteady blade-surface pressures show that the stator experiences about ten times higher of unsteadiness compared with the rotor. Notable changes appear at the vane lead-ing edge due to the potential disturbance as well as the sweeping effects from the wake of the upstream propeller, whereas more significant unsteadiness occurs at the stator tip region as a result of the interaction between the rotor/stator tip vortices. The visualization of vortex structures addresses that the rotor tip vortex has a dominant effect on the stator tip vortex since the latter one starts right at the impingement location on the vane top in this configuration. Furthermore, a longer and a shorter SRV were investigated based on the original case to explore different inter-action patterns for the rotor/stator tip vortices. Weaker effects have been observed as expected.     

高速加工HSK工具系统的精度

运用弹性力学和材料力学理论,通过理论分析和试验方法研究了HSK工具系统静态和动态的定位精度,给出了夹紧力和刀柄锥度的关系,并进一步指出合适的夹紧力是保证HSK工具系统在高速加工时轴向和径向定位精度的必要条件.分析结果表明:HSK工具系统能在高速情况下保证高精度,是由于实际的轴向夹紧力能保证刀柄的锥面和端面时刻与主轴保持接触.